- Confiscate money printers by raiding player apartments after they trigger a wanted level
- Wanted stars are the key mechanism that unlocks police raid eligibility
- Tunnel access is the primary red flag — entering it can flag players in immigration checks
- Server switching is the counter-strategy criminals use, so coordinate with your team
- Maximum payout per raid can yield up to 50 money printers from a single apartment
Understanding Money Printer Confiscation Mechanics
In San Diego Border Roleplay, money printers are high-value illegal items that players purchase from a hidden NPC inside the border tunnel. A regular money printer costs $20,000 and generates $4 every 4.4 seconds. Players can place up to 50 printers in a single apartment, earning roughly $163,000 per hour completely AFK. For law enforcement players, confiscating these printers is one of the most impactful actions you can take.
Video Highlights:
- Money printers are purchased from an NPC deep inside the border tunnel
- Regular printers cost $20,000; Super printers cost 79 Robux
- Up to 50 printers can be placed in one apartment
- Printers are only lost when an apartment is successfully raided by police
- Rejoining the game clears wanted stars, which is how criminals avoid raids
The core mechanic you need to understand is that printers are only permanently destroyed through a successful police raid. Leaving the game, switching servers, or even getting arrested while carrying printers in your inventory will not remove them. This makes the raid the single most important tool for law enforcement to disrupt illegal money farming operations.
Before attempting a raid, monitor the server for players who recently crossed the border. If a player entered the tunnel area and then crossed legally, there is a chance they are flagged in the immigration system. These are your prime targets.
| Printer Type | Cost | Income Rate | Max Per Apartment |
|---|---|---|---|
| Regular Printer | $20,000 in-game | $4 / 4.4 sec | 50 |
| Super Printer | 79 Robux | Faster than regular | 50 (combined) |
| Full Setup (50 Regular) | $1,000,000 | ~$3,000 / min | N/A |
| Hourly Yield (Max) | N/A | ~$163,000 / hour | N/A |
How Wanted Levels Trigger Raids
Not every player with money printers is eligible for a raid. The system requires the apartment owner to have an active wanted star before police can breach their property. Understanding what triggers these wanted levels is essential for any officer looking to confiscate printers.
Primary Wanted Level Triggers
The most common trigger is the immigration check flag. When a player enters the tunnel to buy printers, the game may log that tunnel entry in the immigration system. Even if the player crosses the border legally afterward, the tunnel visit can still appear during inspection. If border patrol detects this flag, the player receives a wanted star.
Experienced money printer farmers use a specific counter-strategy: they leave the game and rejoin immediately after purchasing printers. This clears the wanted level before they cross the border. If a suspect has no wanted star when you check, they may have already used this trick.
| Trigger Type | How It Works | Can Player Avoid It? |
|---|---|---|
| Tunnel Entry Flag | Immigration check detects tunnel visit | Yes — rejoin game to clear |
| Border Inspection Fail | Border patrol sends player to inspection | Yes — switch servers and retry |
| Active Crime | Robbing bank, breaking into houses | No — while crime is active |
| Carrying Printers | Having printers in inventory | No — but does not trigger alone |
Why Some Players Are Untouchable
Players who follow a strict protocol — rejoining after purchase, crossing legally, avoiding all crimes, and staying inside their apartment — are extremely difficult to raid. Their wanted level remains clean, and without it, police cannot initiate a confiscation. Your best opportunity comes when players make mistakes, such as committing other crimes while farming.
Step-by-Step Raid and Confiscation Process
Executing a successful raid requires coordination, timing, and an understanding of the target's behavior. Follow these steps to maximize your confiscation rate.
Identify the Target
Monitor the border crossing area for players who recently passed through immigration. Look for anyone flagged with a wanted star or who was sent to inspection. Cross-reference with apartment ownership records to locate their property.
Verify Wanted Status
Confirm the target has an active wanted level. Without a wanted star, the raid option will not be available. If the player has a clean record, wait and watch for them to commit a crime or re-enter the tunnel area.
Coordinate Your Team
Assemble a raid team before approaching the apartment. A solo raid is risky because the target may have allies defending the property. Communicate the apartment location and assign roles — breacher, cover, and confiscation officer.
Breach the Apartment
Initiate the raid on the target's apartment. Move quickly to locate all money printers inside. The target may attempt to flee or fight back, so maintain control of the situation and secure the area before proceeding to confiscation.
Confiscate All Printers
Once the apartment is secured, confiscate every money printer on the premises. A full setup can contain up to 50 printers, representing a massive financial loss for the owner. Ensure no printers are missed before leaving the scene.
A successful raid not only removes the printers but also resets the target's illegal income stream. They will need to spend another $1,000,000 to rebuild a full 50-printer setup — a significant setback.
Police vs. Criminal Strategies Comparison
Understanding both sides of the money printer economy makes you a more effective officer. Here is how police and criminal tactics compare in San Diego Border Roleplay.
Police Strategy
- Monitor border activity for tunnel entry flags
- Track wanted players to their apartments
- Coordinate team raids for maximum efficiency
- Target active criminals who also farm printers
- Confiscate all printers in a single sweep
Criminal Counter-Strategy
- Rejoin immediately after buying printers
- Switch servers if sent to inspection
- Avoid all crimes while farming
- Stay inside apartment to remain undetected
- Cross border legally every time
| Aspect | Police Advantage | Criminal Advantage |
|---|---|---|
| Detection | Immigration flags reveal tunnel visits | Rejoining clears wanted stars |
| Timing | Raids can happen at any moment | AFK farming runs 24/7 |
| Risk | Low risk for officers during raid | High loss if raided (all printers) |
| Recovery | Can raid again after rebuild | Must spend $20K per printer |
| Counter | Wait for criminal mistakes | Stay clean and hidden |
The money printer system creates an ongoing dynamic between police and criminals. Officers who consistently patrol the border and track suspicious players will eventually catch farmers who slip up. Patience and observation are your most valuable tools.
Common Raid Scenarios and Outcomes
Not every raid goes according to plan. Here are the most common scenarios you will encounter and how to handle them.
Scenario 1: Clean Target with No Wanted Level
You have identified a player with printers but they have no wanted star. This means they followed the rejoin protocol perfectly. You cannot raid this player until they commit a crime or re-enter the tunnel. Your best option is to monitor their activity and wait for a mistake.
Scenario 2: Target Switches Servers Mid-Raid
If the target realizes a raid is incoming, they may leave the server. Printers in their inventory are not destroyed by switching servers — they remain safe. However, printers already placed in the apartment before the switch may still be confiscatable if the raid was already initiated.
Scenario 3: Target Has Allied Defenders
Some players group up and defend each other's apartments. Always scout the apartment before breaching. If multiple defenders are present, call for additional officers before initiating the raid.
Criminals who get sent to inspection at the border will often switch servers to try again. If you notice a player repeatedly joining and leaving, they are likely a money printer farmer trying to avoid detection. Keep an eye on their movements.
| Scenario | Probability | Best Response |
|---|---|---|
| Clean target, no wanted star | High | Monitor and wait for mistake |
| Target switches servers | Medium | Note username, track across servers |
| Allied defenders present | Medium | Call backup before breaching |
| Target caught mid-crime | Low | Immediate raid — best opportunity |
| Target re-enters tunnel | Low | Wait for immigration flag, then raid |
Raid Preparation Checklist
Before heading out to confiscate money printers, make sure you are fully prepared. Use this checklist to ensure nothing is overlooked.
Pre-Raid Preparation:
- Confirm target has an active wanted star
- Verify target's apartment location
- Assemble a raid team of at least 2-3 officers
- Scout the apartment for allied defenders
- Coordinate breach and confiscation roles with your team
- Monitor target behavior for last-minute server switches
After a successful confiscation, document the target's username and apartment number. Many players will immediately attempt to rebuild their printer setup. If they return to the tunnel to buy new printers, you may get a second raid opportunity within the same session.
Maximizing Confiscation Efficiency
To get the most out of your patrol time, focus on high-traffic periods when more players are actively crossing the border. During these windows, the likelihood of tunnel flags and inspection failures increases significantly. Coordinate with other officers to cover multiple border checkpoints simultaneously, increasing the chances of catching a flagged player before they can rejoin and clear their wanted level.
| Time Period | Border Activity | Raid Opportunity |
|---|---|---|
| Peak hours (evening) | Very high | Best — many players crossing |
| Off-peak (morning) | Low | Poor — fewer targets available |
| Weekend afternoons | High | Good — mixed skill levels |
| Late night | Medium | Fair — mostly AFK farmers |
| Immediately after updates | Very high | Excellent — players returning to check changes |
Frequently Asked Questions
Q: Can police confiscate money printers from any player?
No. Police can only raid an apartment if the owner has an active wanted star. Players who follow proper protocols — rejoining after purchase, crossing legally, and avoiding crimes — are generally safe from raids. The raid option only becomes available when the system flags the player.
Q: What happens to confiscated money printers?
When police successfully raid an apartment, all money printers inside are permanently destroyed. The owner must repurchase each printer from the tunnel NPC for $20,000 each. This is the only way to permanently remove printers, as leaving the game, switching servers, or being arrested will not destroy them.
Q: How do criminals avoid getting raided in San Diego Border Roleplay?
The most effective method is rejoining the game immediately after purchasing printers, which clears any wanted level from tunnel entry. Players also switch servers if sent to inspection at the border, avoid committing any crimes while farming, and stay inside their apartment to minimize detection.
Q: How many money printers can one apartment hold?
A single apartment can hold up to 50 money printers. With regular printers generating $4 every 4.4 seconds, a full setup earns approximately $3,000 per minute or over $163,000 per hour. Confiscating a full setup represents a massive financial loss for the owner.